Conventional Fire Alarm Control Panel GSA-1000

The fire alarm system, GSA-1000 manufactured by Telefire, is a fire alarm and automatic extinguishing control panel. The fire alarm control panel is computerized and it has the ability to work in different modes, that can be programmed and changed any time in the field without any special tools. The access is for authorized personnel only.

The system can work in two or three-wire mode. The system controls 4, 8 or 16 detection lines - according to the Control Panel capacity and the related programmable outputs lines that enable the operation of sirens, automatic extinguishing devices, evacuation alarm or any other outputs devices.

In addition there are separate general outputs for fire alarm bells , automatic dialer, magnetic door releasers and "dry" contacts for general alarm and trouble. enabling interface to other systems. The system modes enable to work as a regular fire alarm control panel, an extinguishing control panel including crossed zones, extinguisher delay and alarm evacuation or a any combination of both. The display of the control panel is clear and detailed. It is based on LED, digital display and optional liquid crystal display (LCD).

The fire alarm control panel can be expanded to 16 detection zones and it includes the source for computer communication, digital secondary board etc. All the control panel lines are protected again short-circuit and cut. The output lines are constantly controlled and automatically disconnected, in over current condition. The battery is supervised including loading test to insure normal operation in main failure condition. Each event in the system is clearly displayed to allow easy and fast trouble detection by the user, technician or service personal of the different levels.The system includes alarm verification for better reliability, and walk test mode for easy servicing.